第6年
孔板流量計KOF
靜壓攬式液位計
工業污水PH電極 工業污水復合PH電極
3051智能差壓變送器
風差壓變送器
315壓力液位計
KOF200 孔板流量計
Ultrasonic Switches
Ultrasonic switches are a cost-effective solution for your applications. Installation requires
mounting the sensor (threaded or flanged) to the vessel, connecting the power and control wires,
and applying power. There is no additional set-up or calibration required. Since it is an electronic instrument with no moving parts, preventive maintenance is limited to an annual visual
inspection. The only recommended spare part is the “board” at a quantity of one board for every
10 units. A technician with basic electrical skills (wiring) can service the instrument.Why use an ultrasonic switch ove
mounting the sensor (threaded or flanged) to the vessel, connecting the power and control wires,
and applying power. There is no additional set-up or calibration required. Since it is an electronic instrument with no moving parts, preventive maintenance is limited to an annual visual
inspection. The only recommended spare part is the “board” at a quantity of one board for every
10 units. A technician with basic electrical skills (wiring) can service the instrument.Why use an ultrasonic switch ove
更多詳情
Ultrasonic Switches
Ultrasonic switches are simple to apply and use. There are only a few limitations to their use:
The media must be liquidProcess temperature between -40 and 250oF (-40 to 121oC)
The media must have less than 5% suspended solids
No aeration in fluids with a viscosity of 100cP (30W motor oil) or greater
The following chart will assist you in selecting the right product for your application.
cription="" style="margin: 0px; padding: 0px; border: 0px; line-height: 1; font-family: inherit; max-width: 100%; vertical-align: middle;" />
手機圖頁網
